Официальные поставки оборудования
и комплектующих из Европы

info@famaga.ru

Почта для заявок

Россия

+7 800 55 173 55

Заказ на Dwyer Instruments LTS-N11G-025 — 30.10.2019

Dwyer Instruments LTS-N11G-025 — Отправить заявку на info@famaga.ru

Вся лента заказов

Состав заказа:

Производитель: Dwyer Instruments
Страна: США
Артикульный номер: LTS-N11G-025
Описание: Датчик наклона
Дата последнего заказа: 30.10.2019

Менеджеры Famaga успешно приняли и отгрузили заказ на Dwyer Instruments LTS-N11G-025 от 30.10.2019 в Дублин. После отправки заявки заказчик получил от нашей компании лучшую цену. Интересует такой же товар? После отправления заявки, наши менеджеры помогут Вам выбрать и купить нужный товар Dwyer Instruments в кратчайшие сроки. Для запроса цен и сроков поставки, пожалуйста, заполните форму обратной связи или пришлите описание необходимых Вам наименований на электронный адрес info@famaga.ru

Оставьте заявку

Наш менеджер ответит на любой вопрос.

Ваше имя

Напишите своё имя

Контактный телефон

Напишите телефон для связи

Напишите свой адрес электронной почты

ИНН

ИНН необходим для выставления счетов
Неверный номер ИНН

Нажимая на кнопку «Отправить запрос», вы принимаете условия обработки информации

Ежедневно обрабатываем более 200 заказов

Следите, какое оборудование заказывают наши клиенты прямо сейчас

Вся лента заказов

Производитель

Состав заказа

Dwyer Instruments

MS-111 Датчик разряжения 24VDC

Dwyer Instruments

A-602 Монтажный комплект к датчикам дифференциального давления

Dwyer Instruments

1950-1-2F Взрывозащищённое реле дифференциального давления (100-398 Па)

Kipp

K0791.03516030 Стопорный палец

HOTSTART

CL 1402XX-200 Отопитель CL 4000W 240V 100-120F

HOTSTART

CSM10302-000 Отопитель 240V 60Hz 1P 3kW COOLANT SYSTEM

Rohrback Cosasco Systems

550100-1-1 Пробка Hollow Plug Assembly

NABERTHERM

641/13 Печь камерная with Controller B 400 with integrated process documentation Electrically heated chamber-annealing furnace with radiation heating 1. Scope of supply • Electrically heated chamber furnace N641/13 with • Controller B 400 • NTLog / NTGraph Basic integrated process documentation by means of data recording on customer‘s USB flash drive 2. Process 2.1. Process according to customer’s specifications Material to be specified by the customer Process to be specified by the customer Max. product dimensions to be specified by the customer Max. charge weight to be specified by the customer Cycle details to be specified by the customer Process guarantee customer takes over process responsibility 2.2. Process defined by Nabertherm • The furnace can be opened and loaded / unloaded both, in cold and hot condition • Heating elements only active if furnace is closed • This kind of furnace runs typically on one holding temperature in continuous mode. Of course different profiles can be run according to the type of controller and the physical characteristics of furnace and charge. • Loading / unloading: manual or with forklift 3. Defined application • For thermal processes where the loading and unloading will be carried out up to Tmax • Furnace suitable for continuous operation • Furnace can also be used for temperatures below the temperature operating range, but with restrictions regarding temperature- uniformity and control- accuracy. • Loading/ unloading: manual or with forklift from the front • To be used for processes with no generation of explosive gas atmospheres as a result of exhaust gases, vapours, or other combustible substances from the charge or test material. • To be used for processes with no use generation of hazardous substances which require additional protective measures. • No thermal processes with uncontrolled chemical or thermodynamic reactions. • For thermal processes which do not require clean oven atmospheres • Not useful for food heating 4. Applied norms and specifications 1.1. General Norms and Directives • EN 60335-1 • EN 61000-6-1, EN 61000-6-3 • RoHS directive 2011/65/EU 4.1. Customer’s specifications • Not considered 4.2. Specific norms • The costs of compliance with local codes and regulations are not included in the quote and will be charged separately. The customer will inform and advise the supplier about any additional local codes to make sure that the quote can be amended accordingly. 5. Technical specifications Outer dimensions1 approx. 1850 x 2650 x 2850 mm (W x D x H) Furnace chamber approx. 1000 x 1300 x 500 mm (w x d x h) Work space2 approx. 800 x 1040 x 400 mm (w x d x h) Furnace chamber volume approx. 640 liters Charging height 900 mm Tmax 1300 °C Temperature operating range 750°C – 1300°C Temperature uniformity ± 10°C at 750- 850°C and ±5°C 850°C- Tmax according to DIN 17052-1 in the in the empty work space Supply voltage 380- 400- 415V 3/PE 50/60Hz, fuse protection without earth-leakage breaker, IT-net connection possible against surcharge Power rating approx. 72- 80- 86kW Max allowed charge weight 640 kg uniformly distributed load 1 Dimensions without external additions e.g. flaps External dimensions vary depending on additional equipment. Exact dimensions on request. 6. Customized furnace design 6.1. Basic Design / Housing • Double-walled housing with rear ventilation. External wall temperatures on the side walls < 65°C at ambient temperature 20°C. 1 • Frame for ergonomic height • Coating: RAL 9006 • Door cover made of structured stainless steel • Furnace can be transported by forklift / stacker • Temperature measuring port ø40mm in the furnace roof 1 External wall temperature at the collar and openings can be higher 6.2. Door • Parallel guided door with counter weight for easy opening • Upward swinging • Manual movement 1.2. Insulation • High quality insulation made of lightweight refractory brick and microporous rear insulation. • Rapid reheating after short term door opening in continuous operation mode • Furnace ceiling bricked as a vault • Furnace bottom made of lightweight refractory bricks with of SIC-plates • SIC side protection plates, height approx. 2/3 of inner dimensions to protect the heating elements • Exhaust opening in rear wall of furnace • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2 6.3. Heating system • Three-sided heating. Heating elements are located in bottom and side walls • High-quality, free-radiating heating elements mounted on support tubes • Single-zone control • Switching off the heating by: • Opening the door via door safety switch • Overtemperature due to the temperature selector limiter • Malfunction controller/measuring circuit 6.4. Gas management system No gas management system included (see additional equipment) 6.5. Protective gas box/ Annealing box • No Protective gas box/ Annealing box included, (see additional equipment) • Ovens with gassing boxes are characterized by a very good price / performance ratio. In gas boxes, good heat treatment results under protective gas can be achieved, which are sufficient for many requirements. If the charge requires a completely oxygen-free atmosphere, retort furnaces can be offered. In this case we will be pleased to send you an alternative offer • Note: Wear parts made of metal inside the furnace such as muffles, insert boxes, roller conveyors, charging plates or sheet metal linings are subject to increased wear depending on the respective use. In addition to the process and the type of application, the service life also depends on the frequency of use. There may be distortion of these components. A slight deformation is normal and requires no further measures. However, if larger distortions occur, rework or replacement of the component is recommended. A regular check of the functionality by the customer is recommended. 7. Controls, switchgear and process documentation 7.1. Controller B400 • Easy and individual programming • Bright, high-contrast, black-white LC display • Status messages in clear text display (2 text lines and a ticker) • Data input by jog dial and 4 buttons (start/stop/pause, menu, back, info) • User administration • 5 programs storable with 4 adjustable segments each • User management with three different access levels for an increased process safety • Operator = Basic functions to start/stop the furnace • Supervisor = additional rights for program entry and modifications • Admin = additional rights to change parameters etc. • Controller lock function with password as protection against mis-operation • Skip function to jump to the next segment in a running program • Control of one heating zone • Input of ramps • as gradient (e.g. 100 K/h up to 600 °C) • or by time and temperature (e.g. in 6 hours to 600 °C) • Input of set points in increments of 1 °C resp. 1 min • Copy function of programs for simple modification • Delete function of programs • Program start at current furnace temperature possible • Up to 2 segmental switchable functions (e. g. relays for flaps, gas systems, cooling etc., depending on furnace equipment, extra functions with clear text description = flap, gas-supply, etc.) • Extra functions can be also used after program end (e.g. to continue a fan running) • Timer with start time adjustable via real time clock • Detailed information menu with • Program operating time (elapsed time, remaining time) • Operating hours counter • kWh counter • Error message history as plain text • Display of output values • Input of control PID parameters in freely selectable temperature steps • Measurement range calibration with up to 10 selectable supporting points • Measurement accuracy ± 1 °C • Self-optimizing function for single zone controlled furnaces • Alarm functions available (requires optional accessories) • Settable modes in case of power outage • Program continues when power returns, independent from other conditions • Program continues when power returns, if outage time < 2 min. Otherwise, program is aborted. • Program continues when power returns, if temperature did not fall more than 50 K. Otherwise, program is aborted. • Program is aborted when power returns, independent from other conditions • Language selection of: DE/EN/FR/IT/SP/RU/NL/DK/NO/PL/PT/SE/CZ/HU/TR/RO • °C/°F selection • NTLog USB interface for recording of process data, visualization possible with NTGraph • Internal over temperature protection with automatic switch off if set-temperature is exceeded with more than 30 °C for more 3 min. • Integrated gradient monitoring with adjustable switch-off parameters (temperatures and deviations): if the set deviation is exceeded during heat-up the furnace heating is switched off. • Import and export function via USB port for simplified service checks or program import (see description NT-Edit) • Optionally available (other controller types may be required) • Data interface via Ethernet • Acoustic signal 7.2. Freeware NTEdit for program editing on a PC • Clearly structured editing of programs on a PC • Transfer to the controller via customer’s USB stick • Import function of programs via customer’s USB stick • Graphical overview of the set program on a PC • Language selection of: DE/EN/FR/IT/SP/RU/ZN/PT • Download is provided at http://www.nabertherm.com/download/ • Use of MS Excel required • For PCs with Microsoft Office 2007/2010/2013 for Windows (32/64Bit) 7.3. Switch gear • Controls and switchgear in a separate wall mounted cabinet, for fix connection • Connection to switchgear on the left side of the oven • Distance between oven and switchgear: 1,5m “A” • Distance from left rear edge of the oven to the right edge of the switchgear • Distance true for cable routing on the floor • Ergonomic height of control elements • Connection cable in flexible steel tube • switchgear IP 51 protected • Switchgear colour RAL 7035 • Thermocouples type S • Temperature selection limiters with adjustable cut-out temperature for thermal protection class 2 in accordance with EN 60518-2 as temperature limiter to protect furnace and load. Fully independent from the main controller. • Thyristor control (SSR logic operation) • Safety contactor • 3 Amperemeters • Main Switch • Environmental conditions for electrical equipment: • temperature +5°C up to +40°C • humidity < 80%, not precipitating 7.4. NTLog/NTGraph for Nabertherm controllers Process documentation by means of data recording on customer’s USB flash drive • Data stored in CSV format, evaluation via spreadsheet program (e. g. MS Excel for Windows) possible • Recorded data: time difference, segment number, temperature set points, actual temperatures, power outputs, control functions • Checksums to protect against accidental data manipulation. For enhanced requirements with respect to unforgeable documentation according to ISO 9000 et seqq. as well as for long time documentation Nabertherm offers other professional solutions. • Easily accessible USB port • Storage volume, depending on controller type: • P300 / 310/330 B130 / 150/180 C280, all from version 3.0: Up to 16,000 sets of data in up to 8 files • B400 / 410, C440 / 450, P470 / 480: Up to 80,000 sets of data in up to 16 files When saving further sets of data, the eldest file is overwritten. • Simultaneous use of NTLog and Controltherm MV is not possible. With the 400 series controllers, the use of VCD software and NTLog is possible. Visualization of Process Data with NTGraph (freeware) • Software tool NTGraph to visualize the data in MS Excel for Windows (versions 2003/2010/2013) available free of charge • Data displayed as a diagram, in a table or a simple report • 8 different pre-set designs for the curve design available (color, scaling or naming), individually adaptable • Prepared in 8 languages (DE/EN/FR/IT/SP/IT/CH/RU), adaptation of texts in other languages possible. Excel reports of the Russian and Chinese version in English, description of the data sets in English or German • This charge-free tool is excluded from warranty; there is no entitlement to support. In case NTGraph is not compatible to your PC system another spreadsheet program can be used for data evaluation. 8. Supplied documents • Operating instructions • CE- declaration of conformity according to - 2014/35/EU Low voltage regulation • Operating instructions in English or German. Translation into national language will be done by customer. If required, translation into national language can be done also by Nabertherm by charging the extra costs. 9. Acceptances, Installation and Commissioning • No installation and commissioning included (see additional equipment). 10. Non-compliances with customer’s specifications, terms & conditions

SEW-EURODRIVE

MM30D - 503 - 00 Частотный преобразователь

MALONEY TECHNICAL

200-0600U-XX поршень шаровый раскачиваемый полиуретановый

MALONEY TECHNICAL

200-0800U-XX поршень шаровый раскачиваемый полиуретановый

MALONEY TECHNICAL

200-1200U-XX поршень шаровый раскачиваемый полиуретановый

Dwyer Instruments

LTS-N11G-025 Датчик наклона

Dwyer Instruments

Взрывозащищённое реле протока V4-2-U, корпус латунь, универсальная лопасть, Exd IIB T6

Dwyer Instruments

1950-1-2F Взрывозащищённое реле дифференциального давления (100-398 Па)

Прочие заказы Dwyer Instruments

Вся лента заказов

Бренд

Dwyer Instruments

Заказ

A-465 Датчик давления промывочного пространства DWYER Flush space press sensor

Куда

г Москва

Бренд

Dwyer Instruments

Заказ

RHP-2S11 Датчик температуры и влажности HUMIDITY/TEMPERATURE TRANSMITTERS Housing type: OSA with sintered filter RH Output: 4 to 20 mA Temperature Output: 4 to 20 mA

Куда

г Москва

Бренд

Dwyer Instruments

Заказ

475-00-FM Цифровой портативный манометр Handheld digital manometer, range 0-4.000" w.c. (0.996 kPa), max. pressure 5 psig

Куда

г Москва

Бренд

Dwyer Instruments

Заказ

VBS-1 Vibration switch, 0-25 mm/s Vrms range

Куда

Киев

Наверх страницы

Производитель

Dwyer Instruments