Описание

SSI touch position display for absolute SSI sensors.The fast SSI display Type 570T is designed for absolute SSI encoders up to 32 bit resolution. It can be used as master or slave display.With simple bit assignment and bit blanking, the scalable, linearizable display can also be cascaded to extend the display range as desired. 4 limit values, analog output and RS232 interface are available as output variants.
Mechanical
Modelelectronic
FeaturesPreset counterPosition displays with limits
Dimension 196 x 48 mm | 92 x 45 mm
Protection levelIP20IP65
Working temperature-20 °C ... +60 °C
Weight200 g
Resetelectronic
(1) Installation | Front panel
Electrical
Supply voltage115 V AC230 V AC18...30 V DC
Signal inputTTL / RS422PNPSSI, binarySSI, grey
Signal outputAnalog ±10 VAnalog 0–10 VAnalog 0–20 mAAnalog 4–20 mA
Properties
  • Designed for SSI formats from 8 to 32 bits.
  • 4 switching outputs as limits or presets (response time < 1 ms), also programmable with trailing preset.
  • Scalable analog output (response time < 1 ms), resolution 16 bit, -10 to +10 V, 0 to 20 mA or 4 to 20 mA.
  • RS232 or RS485 serial interface for reading and writing data.
  • Version with 2 relay outputs as limits or presets, also programmable as trailing presets.
  • Gray or binary code.
  • 96 x 48 mm DIN housing, IP65.
Benefits
  • AC and DC power supply in one device.
  • Master or slave operation.
  • Screw terminal connection.
  • SSI clock frequencies from 100 Hz to 1 MHz.
  • Display can be adjusted by scaling and offset programming.
  • Large 13 mm high LCD display, 8 digits, with adjustable brightness. 3-color – red / green / yellow – programmable.
  • Concentricity function.
  • Linearization over 24 points.
  • Bit blanking.
''